FREE SHIPPING TO USA!*exclusions apply

SPE-S100100

SPE 6.7L Powerstroke Cold Side Pipe

Customer Reviews

Based on 1 review Write a review

SPE 6.7L Powerstroke Cold Side Pipe

Fixes the problematic OEM plastic intercooler boot on the 2011-2016 Powerstroke as well as the silicone boot on the 2017-2022 Powerstroke, both which are known to explode or burst under high boost and increased heat.

Benefits:

  • Easy installā€” Simple instructions that even an amateur can follow.Ā 
  • Durableā€” Includes a billet anodized throttle body adapter and flexible 5-ply silicone coupler boot.
  • Integrated Reference Portsā€” Gives you the ability to read boost reference or use for injectables with no drilling required.
  • No Tuning Requiredā€” Designed to work with factory & tuned vehicles.Ā 

Vehicle Compatibility:

  • 2011-2016 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke
  • 2017-2019 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke
  • 2020-2022 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke

Ā 

The SPE Cold Side PipeĀ for your 6.7L Powerstrokefixes the problematic OEM plastic intercooler boot on the 2011-2016 Powerstroke as well as the silicone boot on the 2017-2022 Powerstroke, both which are known to explode or burst under high boost and increased heat.

The SPE Cold Side Pipe increases reliability, durability and performance. The kit includes a billet anodized aluminum throttle adapter with 3 reference ports as well as a 5-ply silicone hose coupler. The throttle body adapter retains thefactory air intake valve thus allowing you to retain your trucks factory emissions components and making for an effortless install.Ā 

Ā 

NEXT LEVEL DESIGN

SPE has taken the 6.7L Powerstroke cold side pipe to the next level. SPE based the design off of the FACTORY 2017+ 6.7 cold side intercooler pipe. Mainly, we wanted to give the customer more options and a better quality product over the factory unit. The main change is obviously material selection. The throttle body is now billet aluminum instead of the factory composite. We also went to a 5-ply silicone based hose rather than the factory rubber. Another major change to the hose is the increase in diameter going up to 3ā€ from the factory 2.5ā€ (on the 17+ models). Taking feedback from customers and install shops, we found a need for injectable and reference ports. By adding these this allows the customer to install water/methanol injection nozzles, boost reference (for example a gauge), or nitrous all while not having to drill anything on the truck. The port angles are also the optimal angle for injectables.

Now available in black anodized only.Ā 

Ā 

This kit includes:

  • SPE designed billet aluminum throttle body adapter
  • Silicone hose coupler
  • O-Ring
  • T-Bolt Clamps (2)
  • NPT Plugs (3)
  • Installation Instructions

Ā 

NOTE- If you're using an aftermarket intercooler, measure your intercooler outlet. MOST are 3". If that is the case and you have a 17-22 Powerstroke you'll need to choose the 11-16 kit in order to have the correct size hose.Ā 

PREVIOUS PART NUMBER: SPE-CSP1116


Ā 

Subscribe