THANKS-GIVING BACK: NOV 26TH-30TH

November 09, 2026 3 min read

Ford May Be Building the GT350 Successor We’ve Been Waiting For

Ford’s Mustang lineup apparently isn’t crowded enough yet. Dealer information reportedly points to another high-performance Mustang arriving late in 2027, and this one sounds a whole lot like a modern GT350. The new car is expected to sit between the 500-horsepower Dark Horse and 795-horsepower Dark Horse SC, with a naturally aspirated 5.2L or 5.4L V8, widebody SC-style sheetmetal and a Tremec transmission. No supercharger. No convertible either. Just a track-focused coupe with a big naturally aspirated V8. Ford hasn’t officially confirmed any of this yet, but if they’re really chasing the old GT350 formula, this might be the S650 we’ve been waiting for.

Source: https://fordauthority.com/



Diesels In Dark Corners XVI

The 16th annual running of Liberty Truck And Tractor Pull’s Diesels In Dark Corners went down in White Plains, Georgia over the weekend and the biggest headline was Shane Kellogg’s dominant, back-to-back wins in the Super Stock truck class. But there was more, much more. Trucking all the way down from Wisconsin, RayJay Rindt grabbed the Friday and Saturday night win in 2.6 behind the wheel of “Wicked White Night,” while Drew Slayback’s “Plain White Wrapper” stole the show Saturday in the 3.0 category. In 3.6, it was Ryan Dedolph putting the Cummins-powered “Rock Diesel” Chevrolet out front. Friday night’s winners included RayJay Rindt (2.6), Adam Kincaid (3.0), Trent Powell (3.6), and (again) Shane Kellogg (Super Stock).

Source: https://fullpull.live/



Billet Blocks Go On The Assembly Line

Production for billet-steel Cummins blocks is ramping up at Chaos Fabrication. Fine-tuning its block program, the company’s latest units run roughly 530 pounds when complete (vs. 450 pounds stock), which is down about 25 pounds over previous versions. All Chaos blocks are machined to accept 9/16-inch head and main studs with 60mm cam bearings and can be bored as big as 4.400-inch. Blocks can be had in stock deck height or +1-inch. With $17,500 being the starting point for these billet-steel crankcases it’s no wonder they’re becoming a hot ticket item in truck pulling—a place where added heft (especially above the front axle) is always welcome.

Source: https://www.chaosfabrication.com/



SEMA Standout: Morgan Evan’s LB7-Swapped ’82 GMC

It might’ve been a thrash fest to get Morgan Evans’ dually SEMA-ready in just five days’ time, but you would never know it by looking at it. Her LB7 Duramax-swapped C3500 impressed at this year’s SEMA Show. Morgan’s Monday-Friday build entailed replacing the big-block V-8 with the O.G. Duramax, ditching the tired TH400 in favor of a ZF-6 manual, and getting all the right parts and pieces to make the conversion as seamless as possible. BD Diesel kicked in a set of up-pipes, exhaust manifolds and a Screamer turbo. Precision Fabrication Plus supplied the powertrain mounting kit, cooling system and hydroboost brake system. Auto Metal Direct provided the premium radiator core support and dual headlamps. And Hot Shot’s Secret made sure all the best fluids were in the engine, in the tank, in the cooling system, in the axles, and even in the transmission.

Source: https://www.hotshotsecret.com/shop/



Rudy’s Recaps The 2026 Race Season

In the aftermath of the ODSS season finale in Knoxville, the folks at Rudy’s Performance Parts had time to reflect on their first championship with the new, billet-aluminum 6.4L-propelled Mustang. Perhaps the most unique aspect of the car is that it was built by Rudy’s own Nathannial DeLong, who just so happens to pilot the beast as well. Despite fighting new build bugs such as tire shake (on countless passes), broken wheelie bars, parachutes that failed to deploy on time, thrown belts, and a small fire, the team from Burlington, North Carolina hung tough and ended up bringing home the Super Diesel hardware for 2026.

Source: https://www.facebook.com/nathannial.delong



Coming Out Of Retirement?

Will “The Fossil” make its return to UCC in 2027? The question was posed on social media last week by the truck’s owner, Logan Yelton. The man behind Loganbuilt Transmission & Race Parts hinted that his ’93 Dodge might just be coming out of retirement next year—and what better way to do it than by bringing it to the biggest race on the calendar! The Fossil is known for its P-pumped, Scheid Diesel-built Cummins powerplant and violent launches, but given Logan’s success with Jordan Newman’s first-gen common-rail race program in 2026, will The Fossil still be mechanically injected when it shows up in Indy? Time will tell!

Source: https://www.facebook.com/Loganbuilt



Leave a comment

Comments will be approved before showing up.

Subscribe